Load Cells

TSP Series Single Point Load Cell
The economically priced TSP is a high performance, low profile, single point load cell for use in platform and hanging scales, counting scales, hoppers and packaging scales, and a variety of other medical, industrial and process weighing applications.
The TSP single point load cell is easy to install and use and is interchangeable with most other load cells of its type. All critical components and wiring are encapsulated to protect against moisture and to insure stable operation of the TSP in harsh environments
Capacities Available:
TSP-5KG 5kg
TSP-7KG 7kg
TSP-10KG 10kg
TSP-15KG 15kg
TSP-20KG 20kg
TSP-30KG 30kg
TSP-50KG 50kg
TSP-100KG 100kg

SP High Capacity Single Point Load Cell
These heavy capacity single point cells are designed for small, medium and large bench scales and clinical scales.
The unique design of our single point load cells offers cost-saving advantages for many weighing applications. The load cell can be mounted directly to the weighing platform, thereby eliminating flexures, pivots, bearings and mechanical levers.
All load cells have threaded mounting holes, and a 7' integral multiconductor cable secured by a strain relief seal
Capacities Available
SP-200ALM 200 lb
SP-200LM 200 lb
SP-500LM 500 lb
SP-1000LM 1,000 lb


CB6 Series Bellows Type Load Cell
The CB6 is a high performance, sealed bending beam load cell for use in low profile platforms, flexure bases, hanging scales, scale conversions, hopper and packaging scales, and a variety of other medical, industrial, and process weighing applications.
The CB6 is easy to install and use and is interchangeable with most other load cells of its type. Stainless steel construction and welded bellows seals are critical components making the CB6 ideally suited for use in harsh and corrosive environments and where routine "washdowns" occur.
Capacities Available
CB6-10KG 10 kg
CB6-20KG 20 kg
CB6-50KG 50 kg
CB6-100KG 100 kg
CB6-200KG 200 kg

LFB Type Shear Beam Load Cell
Cardinal's 125 kg to 1250 kg capacity beam type load cells have a low profile design, and are made specifically for light to medium weighing applications such as floor scales. Their design makes them highly resistant to eccentric loads. Stainless steel construction offers strength and the ultimate in protection when caustic or corrosive environments are encountered.
These cells are potted with a proprietary sealant that offers superior waterproofing, while remaining flexible over the life of the load cell. This special compound protects the load cell strain gages, and over a broad temperature range, has no effect on load cell precision accuracy.
Provided with the cell are mounting holes for securing the cell, and a 3 m integral multiconductor shielded cable secured by a compression strain relief seal.
Capacities Available
LFB-250M 125 kg
LFB-500M 250 kg
LFB-1000M 500 kg
LFB-2500M 1250 kg

SB Series High Capacity Shear Beam Load Cell
The SB series beam cells with capacities from 1130 kg to 9000 kg promote a variety of applications, such as low profile platform scales, tank and/or hopper weighing, and other process control systems. The design of these cells makes them highly resistant to eccentric loads. Construction of high grade stainless steel in these cells offers strength, and the ultimate in protection when caustic or corrosive environments are encountered. Provided with the cell are mounting holes for securing cell, and a 6 m integral multiconductor shielded cable secured by a compression strain relief seal.
These cells are welded closed, providing superior waterproofing, while remaining flexible over the life of the load cell. This protects the load cell strain gages, and over a broad temperature range, has no effect on load cell precision accuracy.
Capacities Available:
SB-2500S 1130 kg
SB-5000S 2260 kg
SB-10000S 4500 kg
SB-20000S 9000 kg

SCA Series Compression Load Cell
The SCA heavy capacity series of compression load cells are ideal for multiple load cell compression applications such as motor truck scales, railroad track scales and heavy duty tank weighing systems.
Load cells are fabricated from stainless steel to provide the ultimate in protection when caustic, corrosive or wet environments are encountered. Load cells are hermetically sealed for absolute water protection (IP67).
Each load cell is furnished with stainless steel load buttons on each end, and a 9 m integral multiconductor cable secured by a strain relief seal.
Capacities Available:
50K-SCA 22680 kg
100K-SCA 45360 kg
120K-SCA 54430 kg

DB Series Double-Ended Shear Beam Load Cell
These heavy capacity series double ended, shear beam load cells are ideal for multiple load cell applications such as motor truck scales and heavy duty tank weighing systems. These load cells are available in a 22500 kg capacity.
Load cells are fabricated from stainless steel to provide the ultimate in protection when caustic, corrosive or wet environments are encountered. Load cells are environmentally sealed for absolute water protection (NEMA 6P/IP67). Each load cell is furnished with a 10 m integral multiconductor cable secured by a strain relief seal.
Capacity:
DB-50000S 50,0000 lb


Z Series Tension Load Cell
The Series "Z" tension load cells are ideally suited for single load cell tension applications. Simplicity of design permits their use in a wide variety of configurations.
The Series "Z" load cell is fabricated from aircraft-quality aluminum alloy, and offers a cost-effective solution to many tension applications.
Load cells (except Z-50 and Z-100) are potted with a proprietary sealant that provides for superior water protection and, at the same time, remains flexible over the life of the load cell. This special compound protects the load cell strain gages, and over a broad temperature range, has no effect on the load cell's precision accuracy.
Each load cell has threaded holes on each end for hanger assemblies, and a 9 m integral multiconductor cable secured by a compression and strain relief seal.
Capacities Available:
Z-50 22.68 kg
Z-100 45.36 kg
Z-250 113.4 kg
Z-500 226.8 kg
Z-1000 453.6 kg
ZX Series Tension Load Cell
The Series "ZX" tension load cells are ideally suited for single or multiple load cell tension applications. Simplicity of design permits their use in a wide variety of configurations. These load cells are available in capacities from 113 kg to 9072 kg.
When caustic or corrosive environments are encountered, the Series "ZX" is ideal. Manufactured of stainless steel, it offers the ultimate in protection.
The ZX-250, 500 and 1000 load cells are potted with a proprietary sealant that provides for superior water protection, and at the same time, remains flexible over the life of the load cell. This special compound protects the load cell strain gages, and over a broad temperature range has no effect on the load cell's precision accuracy. Load cells ZX-2500 and up have the gage cavity sealed by a welded stainless steel cup.
Each load cell has a threaded hole on each end for hanger assemblies, and a 9 m integral multiconductor cable secured by a compression and strain relief seal.
Capacities Available:
ZX-250 113 kg
ZX-500 226 kg
ZX-1000 450 kg
ZX-2500 1134 kg
ZX-3000 1360 kg
ZX-5000 2268 kg
ZX-10000 4536 kg
ZX-20000 9072 kg